Forums | Stopping Power | Articles |
All | Accurate Arms | Alliant | Guests | Hodgdon | Vihtavuori | Winchester | Taffin Tests | New Loads | Calibers in list format
All Load Data
Handgun  
Rifle
Sort by: Powder  Velocity Set alternate row color
46 Handloads
45 ACP, 185 gr
BulletPowder WeightPowderVelocityOALPrimerSource
LSWC 3.7 gr700X Unknown1.135" Fed LP guest
 

LFP 9.7 grAA#5 994 fps1.205" Win LP guest
Bullet is the Ranier Copper plated 185gr FP. Accuracy was excellent for a practice IDPA round. 100% reliable in unmodified Springfield Armory 1911. Recoil was brisk without being punishing.

JHP 13.5 grBlueDot Unknownn/a" CCI LP guest
Hot and accurate in my Colt Combat commander.

JHP 6.7 grBullseye 995 fps1.275" Fed 150 Alliant
Suggested starting load: 6.0 gr

Pressure: 19,400

JHP 6.2 grbullseye Unknown1.275" CCI LP guest
This is the most accurate load I’ve found in my custom colt. I use with hornady xtp and suggest starting at 5.9grs.

LFP 6.0 grBullseye Unknown CCI SP guest
This is a moderately hot but VERY accurate load in a Ruger P90. The bullet is copper plated not lead but about the same hardness. Suggested starting load is 5.0 grains of Bullseye with Federal case. DO NOT substitute other components or primers/bullets/powders!! Seated so the shoulder just shows with a moderate taper-crimp. 1" groups at 50 feet bench rest

TMJ 6.0 grBullseye Unknown CCI LP guest
This is an extremely accurate loading. I used Berry’s preferred PLATED bullets not jacketed with a moderately gentle taper-crimp. Ragged 3/4" hole at 25 feet 2-handed braced. A little hot if you are in timed or rapid-fire competition, you might need practice to re-acquire target.

JHP 5.0 grBullseye Unknown1.200" Fed LP guest
Low recoil target load

LSWC 4.5 grBullseye Unknown1.230" Win LP guest
Using a long nose H&G profile LSWC, will feed reliably from 1.230" to 1.265" OAL in my Springfield 1911. Fine tune OAL to fine tune accuracy. Burns fairly clean, gun functions fine w/ standard recoil spring and is a great practice round.

JFP 4.9 grCLAYS 981 fps1.195" Fed 150 Hodgdon
Suggested starting load: 4.4 gr

Pressure: 17,400 CUP

LSWC 3.8 grCLAYS 700 fps1.260" CCI LP guest
Very mild recoil, 2" group @ 15 yds. Requires use of 12 lb. recoil spring in my Springfield 1911A1 for reliable cycling.

XTP 3.8 grClays 955 fps1.230" Fed LP guest
Very clean, low smoke and recoil. Accurate in my HK 45F and Colt CCO.

JHP 6.8 grGreen Dot 990 fps1.275" Fed 150 Alliant
Suggested starting load: 6.1 gr

Pressure: 19,300

JHP 8.2 grHerco 990 fps1.275" Fed 150 Alliant
Suggested starting load: 7.4 gr

Pressure: 18,500

JHP 5.3 grHiSkor700X 845 fps1.21" Win LP guest
 

JHP 8.6 grHiSkor800X 975 fps1.21" Win LP guest
 

LSWC 5.1 grHP-38 Unknown Win SR guest
I lack felociy & such. Just that I use it indoors with good results, but good results with same bullet only 4.8 gr Green Dot. Same bullet though 5.2 gr of Unique. Planning on old Winchester 452AA which I use with cast 162 gr swc only to be used with the above bullet tip.

JFP 5.9 grHP38 906 fps1.195" Fed 150 Hodgdon
Suggested starting load: 5.3 gr

Pressure: 15,800 CUP

JFP 9.5 grHS6 996 fps1.195" Fed 150 Hodgdon
Suggested starting load: 8.6 gr

Pressure: 16,800 CUP

JHP 8.7 grIMR SR 4756 920 fps1.21" Win LP guest
 

JHP 6.9 grIMR SR 7625 890 fps1.21" Win LP guest
 

JHP 6.1 grIMR-PB 855 fps1.21" Win LP guest
 

JHP 7.5 grNo. 2 1,077 fps1.21" Rem 2-1/2 Accurate
Suggested starting load: 6.8 gr

JHP 10.2 grNo. 5 1,100 fps1.2" WLP guest
 

JHP 10.2 grNo. 5 1,102 fps1.21" Rem 2-1/2 Accurate
Suggested starting load: 9.2 gr

JHP 8.6 grPower Pistol 1,025 fps1.275" Fed 150 Alliant
Suggested starting load: 7.7 gr

Pressure: 18,800

JHP 5.9 grRed Dot 940 fps1.275" Fed 150 Alliant
Suggested starting load: 5.3 gr

Pressure: 19,500

JHP 5.8 grS1000 993 fps1.21" Rem 2-1/2 Accurate
Suggested starting load: 5.2 gr

JFP 5.5 grTiteGroup 956 fps1.195" Fed 150 Hodgdon
Suggested starting load: 5.0 gr

Pressure: 17,000 CUP

JHP 8.2 grUnique 1,030 fps1.275" Fed 150 Alliant
Suggested starting load: 7.4 gr

Pressure: 18,900

LSWC 5.0 grUnique Unknown1.22 " CCI LP guest
Plate match load. Very accurate in my SA Custom Loaded 5" barrel and Dad’s Kimber.

JFP 7.2 grUniversal 993 fps1.195" Fed 150 Hodgdon
Suggested starting load: 6.5 gr

Pressure: 17,000 CUP

LSWC 3.6 grV3n37 Unknown Win LP guest
 

LSWC-HP 3.8 grVihtavuori 310 Unknown1.212" Win LP guest
Most accurate yet in my 1911 Kimber

JHP 5.3 grVV N100 957 fps1.21" Rem 2-1/2 Accurate
Suggested starting load: 4.8 gr

TMJ-SWC 6.5 grVV N320 1,047 fps1.268"  Vihtavuori
Suggested starting load: 5.9 gr

TMJ-SWC 8.1 grVV N340 1,149 fps1.268"  Vihtavuori
Suggested starting load: 7.3 gr

JSWC 6.1 grWin 231 920 fps  Winchester
Suggested starting load: 5.5 gr

Pressure: 18,600 PSI

JHP 6.8 grWin 231 990 fps  Winchester
Suggested starting load: 6.1 gr

Pressure: 19,500 PSI

LSWC 6.0 grWIN. 231 890 fps1.180" FED 150 guest
USE TAPER CRIMP DIE.

JHP 6.7 grWinchester 231 1,050 fps1.200" Win LP guest
High velocity target load

JSWC 7.0 grWSF 950 fps  Winchester
Suggested starting load: 6.3 gr

Pressure: 17,600 PSI

JHP 7.9 grWSF 1,035 fps  Winchester
Suggested starting load: 7.1 gr

Pressure: 19,700 PSI

JSWC 5.3 grWST 890 fps  Winchester
Suggested starting load: 4.8 gr

Pressure: 19,000 PSI

JHP 5.6 grWST 935 fps  Winchester
Suggested starting load: 5.0 gr

Pressure: 19,800 PSI

LSWC 4.5 grWST Unknown1.231" CCI LP guest
1.5" group @ 25 meters from a SA Custom Loaded 5" barrel.

Users assume all risk, responsibility and liability whatsoever for any and all injuries (including death), losses or damages to persons or property (including consequential damages), arising from the use of any data, whether or not occasioned by publisher's negligence or based on strict liability or principles of indemnity or contribution. Handloads.Com neither assumes nor authorizes any person to assume for it any liability in connection with the use of any data.

It took 0.03 seconds to build this page


Questions or comments? | Donate to Handloads.Com | Site Map
Copyright © 2000-2008